1N4002-T |
RFQ for 1N4002-T Required Field |
 |
| Technical/Catalog Information | 1N4002-T |
| Vendor | Diodes Inc (VA) |
| Category | Discrete Semiconductor Products |
| Diode Type | Standard |
| Voltage - DC Reverse (Vr) (Max) | 100V |
| Current - Average Rectified (Io) | 1A |
| Voltage - Forward (Vf) (Max) @ If | 1V @ 1A |
| Reverse Recovery Time (trr) | - |
| Current - Reverse Leakage @ Vr | 5A @ 100V |
| Speed | Standard Recovery >500ns, > 200mA (Io) |
| Mounting Type | Through Hole, Axial |
| Package / Case | DO-41, Axial |
| Packaging | Cut Tape (CT) |
| Capacitance @ Vr, F | - |
| Lead Free Status | Lead Free Compliant by Exemption |
| RoHS Status | RoHS Compliant |
| Other Names | 1N4002 T 1N4002T 1N4002DICT ND 1N4002DICTND 1N4002DICT |
| Product | Manufacturers | Pack | D/C |
| 1N4002-T | - | - | - |
Connected in this manner, an LM317 1-A adjustable-voltage regulator can be used to control the speed of a miniature dc motor or vary the brilliance of a small lamp. The circuit does so by controlling the pulse width, and therefore the current, to the load device.
To set the desired maximum output voltage, momentarily close 51 and adjust R3. Connect either a lamp or small dc motor (as is shown in the schematic to the circuit's output) and adjust R4 for the desired results. Atv device that is driven by this circuit should have a current requirement of 1 A or less. And you should be sure to use good-sized heatsink for the LM317 regulator IC.
| Models | MFG | Pack |
| 1N4001 | Fairchild Semiconductor | DO-41 |
| 1N4001 / M1 | ||
| 1N4001(M1) | ||
| 1N4001/M1 | ||
| 1N40014 | ||
| 1N4001-BP | ||
| 1N4001-E3/23 | ||
| 1N4001-E3/4 | ||
| 1N4001-E3/73 | ||
| 1N4001G | 07+ | |
| 1N4001GP | Fairchild Semiconductor | |
| 1N4001ID | ||
| 1N4001RL | ||
| 1N4001RLG | ||
| 1N4001T | ||
| 1N4001-T | ||
| 1N4001-TP | ||
| 1N4001TR | ||
| 1N4002 | ON Semiconductor | DO-214 |
| 1N4002(M2) | ||
| 1N4002-E3/1 | ||
| 1N4002-E3/4 | ||
| 1N4002G | ||
| 1N4002GP | Fairchild Semiconductor | |
| 1N4002ID | ||
| 1N4002RL | ||
| 1N4002RLG | ||
| 1N4002-T | ||
| 1N4002-TP | ||
| 1N4002TR | ||
| 1N4002SG | ||
| 1N4002S | ||
| 1N4002RLG | ||
| 1N4002RL | ||
| 1N4002L | ||
| 1N4002ID | ||
| 1N4002G-T | ||
| 1N4002GPE | ||
| 1N4002GP | ||
| 1N4002GL | ||
| 1N4002G1N4003G | ||
| 1N4002G/GL | ||
| 1N4002G | ||
| 1N4002E | ||
| 1N4002A | ||
| 1N4002_NL | ||
| 1N4002/L | ||
| 1N4002 | ||
| 1N4001WS | ||
| 1N4001-TP |
